A fuel test kit is simple and easy to use. They are used to detect suspended and separated free water in fuels such as car gasoline, aviation fuel, jet fuel, diesel fuel, biofuels, kerosene, and more.
If, for example, petrol is stretched with kerosene, it will show. The best fuel test kits can also be used to detect microbial growth in fuel, which, if present, negatively impacts machinery performance.
Contaminated fuel may cause the engine to have poor performance, lack power, cause backfiring, and be harder to start than usual.
This is because the contaminants interrupt the process of internal combustion, which produces the necessary power needed for your car to run efficiently.
The Effects of Fuel Contamination
Every once in a while, you may notice a deterioration in your car’s performance. It could have trouble starting or accelerating, an indication of fuel contamination. While it may be impossible to eliminate contamination completely, you can reduce the levels of contamination and curb their impact.
The quality of fuel determines the power generated by internal combustion. When compromised, your car engine will stop running abruptly. Another effect is the lack of response when you step on the gas pedal. It will fail to accelerate.
This effect is more noticeable when driving at higher speeds. The engine will either be slow to pick or become totally unresponsive. Also, you may notice sudden slowing down or acceleration even without stepping on the gas pedal.
This is a cause for alarm and needs to be given immediate attention to alleviate future more damaging issues.
Types of Fuel Tests
Diesel fuel is used in a range of machinery like engines and generators. Several tests can be done to determine fuel quality and possible contamination. Here are a few as detailed by DieselCraft.com:
How to Test for Water in Diesel Fuel
Using a W-5 Test Kit, you’ll be able to detect the presence of suspended water in diesel fuels. By adding a fuel sample into the test tube, you’ll be able to identify the presence of water contamination if the test shows a pink colour.
How to Test Diesel Fuel for Algae
Using a DS-1 Test Kit, you can test for algae’s presence in your fuel by dipping the test kit into the fuel sample. The test is designed to detect bacteria on one side and mould on the other. If there is any sort of reaction in the results, usually spots, that proves the presence of microbial contamination.
How to Test for Gas in Diesel Fuel
Diesel engines may run on a range of fuel types except for gasoline. Small amounts of gasoline present in diesel fuel may not be disastrous. However, large amounts will cause substantial damage to a diesel engine. Here is a simple DIY testing method that you can use at home.
If you leave your diesel fuel test samples covered up for some time, the gasoline tends to evaporate to the top. You can then flash a flame point above the uncovered sample. If the flame lights up, there are definitely traces of gasoline in your diesel.
Before you do this, ensure you are wearing protective gear, gloves, and protective glasses just in case something goes out of hand.
There are various gasoline tests that you can perform to determine the quality of your fuel. Random testing checks your fuel for water content as well as other contaminants. Tester gauge kits vary in range and are either specific to the test you are performing or can check for a combination of issues.
Fuel testing kits range from fuel test strips, gasoline test strips, fuel oil test kits, and combo test kits. These are all available from companies like Conidia who are very well versed with these tests, and offer a wide range including diesel fuel contamination testing kits.
Fuel Purity Test
It is advisable to test the quality of weekly fuel samples if you have a fleet of vehicles. Frequent random testing enhances the overall length of perfect performance for all your machinery.
How Do You Test Fuel for Ethanol Content?
Aviation jet fuel must be ethanol-free. This is because ethanol absorbs significant amounts of water in flight. It may vent off at altitude, thus reducing both range and octane. It can damage the rubber and aluminium components of the aircraft’s fuel system.
Use a test tube bottle with a stopper, draw a permanent line on the test tube, and fill water to this point, filling the rest of the test tube with gasoline. Shake your sample and let it sit until the water and gas separate into two layers. If the water layer rests higher up than before you added gasoline (above the marked line), then your gasoline contains ethanol.
Can I Get Someone Else to Do It?
Yes, definitely. Using a gasoline analysis laboratory to perform your fuel test gives you access to experienced chemists who will use international fuel testing methods as per ECHA (European Chemicals Agency) SKU specifications.
Even though there’s a wide range of fuel quality tests available, premium test kits are best sourced from Conidia.com and DieselCraft.com.
Suppose you are looking to enhance the performance of your equipment through detection and elimination of microbes.
In that case, these tests will give you the best analysis and ensure you only use quality products in your equipment. Conducting fuel pressure tests from time to time using a pump test manometer will also improve your machinery’s overall performance and reduce the total price spent on fixing issues due to enhanced maintenance.